2024 Updated Facebook 100-101 Certification Study Guide Pass 100-101 Fast
100-101 Dumps PDF 2024 Program Your Preparation EXAM SUCCESS
Facebook 100-101: Meta Certified Digital Marketing Associate exam is a certification exam designed to test individuals' knowledge in the field of digital marketing. 100-101 exam is created by Meta, the parent company of Facebook, and is intended to measure an individual's understanding of fundamental digital marketing concepts and practices. Meta Certified Digital Marketing Associate certification provides a comprehensive overview of digital marketing and is an excellent way for individuals to showcase their knowledge and skills.
Facebook 100-101 exam consists of 75 multiple choice questions, with a time limit of 90 minutes. 100-101 exam covers a wide range of topics related to digital marketing, including the use of Facebook tools and ad formats, setting up and managing campaigns, tracking and analyzing performance, and using targeting and bidding strategies to reach specific audiences. 100-101 exam is designed to test candidates' knowledge and understanding of these concepts, as well as their ability to apply them in real-world scenarios.
NEW QUESTION # 48
What does a host on an Ethernet network do when it is creating a frame and it does not have the destination address?
- A. drops the frame
- B. sends a message to the router requesting the address
- C. sends out a Layer 3 broadcast message
- D. sends out an ARP request with the destination IP address
Answer: D
Explanation:
In this case, it will send out an ARP request for MAC address of the destination IP (assuming it doesn't already have it in its table) and then address it to the destination's MAC address.
NEW QUESTION # 49
An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address.
Which of the following should be entered into the IP properties box for the sales server?
- A. IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.25
- B. IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.20.1
- C. IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.9
- D. IP address: 192.168.20.30 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.25
- E. IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.17
Answer: D
NEW QUESTION # 50
Refer to the exhibit.
HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the Toronto router. What will the Layer 2 destination address be at this point?
- A. abcd.2246.0035
- B. 192.168.7.17
- C. 192.168.1.1
- D. aabb.5555.2222
- E. abcd.1123.0045
Answer: A
Explanation:
For packets destined to a host on another IP network, the destination MAC address will be the LAN interface of the router. Since the FTP server lies on a different network, the host
will know to send the frame to its default gateway, which is Toronto.
NEW QUESTION # 51
A business posts and runs ad campaigns frequently and gels inquiries from people. The business wants to be able to follow up with each person individually and track communications with them.
What is the best tool to use to respond to potential customers?
- A. Page Insights to learn more about how the Page is performing
- B. Page Inbox to read and respond to messages and posts
- C. Stones to engage with the audience and talk more about the services offered
- D. Offers to give potential customers a discount to an initial consultation call
Answer: D
NEW QUESTION # 52
Which two statements describe characteristics of IPv6 unicast addressing? (Choose two.)
- A. Global addresses start with 2000::/3.
- B. Link-local addresses start with FF00::/10.
- C. If a global address is assigned to an interface, then that is the only allowable address for the interface.
- D. Link-local addresses start with FE00:/12.
- E. There is only one loopback address and it is ::1.
Answer: A,E
NEW QUESTION # 53
The network manager has requested a 300-workstation expansion of the network. The workstations are to be installed in a single broadcast domain, but each workstation must have its own collision domain. The expansion is to be as cost-effective as possible while still meeting the requirements.
Which three items will adequately fulfill the request? (Choose three).
- A. seven 48-port switches
- B. one router interface
- C. two IP subnets with a mask of 255.255.255.0
- D. seven 48-port hubs
- E. seven router interfaces
- F. one IP subnet with a mask of 255.255.254.0
Answer: A,B,F
Explanation:
of 255.255.254.0 can absorb 510 hosts being 23 bits mask and also 7*48 port switches can handle this much hosts and router interface is required to be minimum to avoid unnecessary wastage hence the answers.
NEW QUESTION # 54
Which IP address is a private address?
- A. 12.0.0.1
- B. 172.33.194.30
- C. 168.172.19.39
- D. 172.20.14.36
- E. 192.169.42.34
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 55
Refer to the exhibit.
The host in Kiev sends a request for an HTML document to the server in Minsk. What will be the source IP address of the packet as it leaves the Kiev router?
- A. 10.1.0.1
- B. 10.1.2.8
- C. 10.1.0.5
- D. 10.1.1.16
- E. 10.1.0.14
- F. 10.1.0.6
Answer: D
Explanation:
Although the source and destination MAC address will change as a packet traverses a network, the source and destination IP address will not unless network address translation (NAT) is being done, which is not the case here.
NEW QUESTION # 56
What can public figures, businesses, brands, organizations and nonprofits create on Facebook to establish a presence and connect with an audience?
- A. Page
- B. Profile
- C. Group
- D. Event
Answer: A
NEW QUESTION # 57
In the configuration of NAT, what does the keyword overload signify?
- A. When bandwidth is insufficient, some hosts will not be allowed to access network translation.
- B. The pool of IP addresses has been exhausted.
- C. If the number of available IP addresses is exceeded, excess traffic will use the specified address pool.
- D. Multiple internal hosts will use one IP address to access external network resources.
Answer: D
Explanation:
Overload simply means using multiple hosts to access the network using the same translated IP address.
NEW QUESTION # 58
Which two characteristics describe the access layer of the hierarchical network design model? (Choose two.)
- A. VLANs
- B. PoE
- C. redundant components
- D. layer 3 support
- E. port security
Answer: D,E
Explanation:
2. Benefits of a Hierarchical Network Scalability: The modularity of the design of hierarchical networks allows you to replicate design elements as the network grows including the use of layer 3 support on network swithces. Because each instance of the module is consistent, expansion is easy to plan and implement. Redundancy: Redundancy at the core and distribution layers ensures path availability in case of any hardware failure in any of the devices on these layers. Performance: Link aggregation between levels and high-performance core and distribution level switches allows for near wire speed throughout the network. Properly designed hierarchical networks can achieve near wire speed between all devices. Security: Port security at the access level, and policies at the distribution layer make the network more secure. is important to keep the core layer free from any tasks that may compromise the speed of the link, all security should be handled at the access and distrubution layers. Manageability: Consistency between switches at each level makes management more simple. Each layer of the hierarchical design performs specific functions that are consistent throughout that layer. Therefore, if you need to change the functionality of an access layer switch, you could repeat that change across all access layer switches in the network because they presumably perform the same functions at their layer. Maintainability: Because hierarchical networks are modular in nature and scale very easily, they are easy to maintain. With other network topology designs, manageability becomes increasingly complicated as the network grows. In the hierarchical model, switch functions are different at each layer. You can save money by using less expensive access layer switches at the lowest layer, and spend more on the distribution and core layer switches to achieve high performance on the network.
NEW QUESTION # 59
Given a Class C IP address subnetted with a /30 subnet mask, how many valid host IP addresses are available on each of the subnets?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
- F. 5
Answer: E
Explanation:
/30 CIDR corresponds to mask 55.255.255.252 whose binary is 11111100 which means 6 subnet bits and 2 host bits which means 62 subnets and 2 hosts per subnet.
NEW QUESTION # 60
Refer to the exhibit.
When running OSPF, what would cause router A not to form an adjacency with router B?
- A. The loopback addresses are on different subnets.
- B. Route summarization is enabled on both routers.
- C. The process identifier on router A is different than the process identifier on router B.
- D. The values of the dead timers on the routers are different.
Answer: D
Explanation:
Explanation/Reference:
To form an adjacency (become neighbor), router A & B must have the same Hello interval,
Dead interval and AREA numbers
NEW QUESTION # 61
What are two key features of WhatsApp? (Choose 2)
- A. Ad placements
- B. Business details
- C. End-to-end encryption
- D. Free messaging and video calls
Answer: B,D
NEW QUESTION # 62
Refer to the exhibit.
A company wants to use NAT in the network shown. Which commands will apply the NAT configuration to the proper interfaces? (Choose two.)
- A. R1(config)# interface fastethernet0/0 R1(config-if)# ip nat outside
- B. R1(config)# interface serial0/1 R1(config-if)# ip nat inside
- C. R1(config)# interface fastethernet0/0 R1(config-if)# ip nat inside source 10.10.0.0 255.255.255.0
- D. R1(config)# interface serial0/1 R1(config-if)# ip nat outside
- E. R1(config)# interface serial0/1 R1(config-if)# ip nat outside source pool 200.2.2.18 255.255.255.252
- F. R1(config)# interface fastethernet0/0 R1(config-if)# ip nat inside
Answer: D,F
Explanation:
Topic 5, IP Services
NEW QUESTION # 63
What is the OSPF default frequency, in seconds, at which a Cisco router sends hello packets on a multi-access network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation/Reference:
On broadcast multiacess and point-to-point links, the default is 10 seconds. On NBMA, the
default is 30 seconds.
NEW QUESTION # 64
Which IOS command is used to initiate a login into a VTY port on a remote router?
- A. router(config-line)# login
- B. router# telnet
- C. router# trace
- D. router# login
- E. router# ping
- F. router(config)# line vty 0 5
Answer: B
Explanation:
Explanation/Reference:
VTY ports are telnet ports hence command B will initiate login to the telnet port.
NEW QUESTION # 65
What is the default maximum number of equal-cost paths that can be placed into the routing table of a Cisco OSPF router?
- A. 0
- B. 1
- C. unlimited
- D. 2
Answer: D
Explanation:
maximum-paths (OSPF)
To control the maximum number of parallel routes that Open Shortest Path First (OSPF) can support, use the maximum-paths command. Syntax Description
maximum
Maximum number of parallel routes that OSPF can install in a routing table. The range is from 1 to 16 routes.
Command Default
8 paths
NEW QUESTION # 66 
Select three options which are security issues with the current configuration of SwitchA. (Choose three.)
- A. Both the username and password are weak
- B. Privilege mode is protected with an unencrypted password
- C. Cisco user will be granted privilege level 15 by default
- D. Virtual terminal lines are protected only by a password requirement
- E. Telnet connections can be used to remotely manage the switch
- F. Inappropriate wording in banner message
Answer: A,B,F
Explanation:
Explanation/Reference:
This answer can be done by simulation only, don't know user name password and banner message etc Which two of the following are true regarding the configuration of RouterA? (Choose two.)
NEW QUESTION # 67
Refer to the exhibit.
A network administrator has configured a Catalyst 2950 switch for remote management by pasting into the console the configuration commands that are shown in the exhibit. However, a Telnet session cannot be successfully established from a remote host. What should be done to fix this problem?
- A. Change the fifth line to ip default-gateway 192.168.17.241.
- B. Change the fifth line to ip route 0.0.0.0 0.0.0.0 192.168.17.1.
- C. Change the sixth line to line con 0.
- D. Change the first line to interface vlan 0/1.
- E. Change the first line to interface fastethernet 0/1.
Answer: A
Explanation:
The default gateway for remote session is 192.168.17.241 and not the one given in the exhibit.
NEW QUESTION # 68
In the configuration of NAT, what does the keyword overload signify?
- A. When bandwidth is insufficient, some hosts will not be allowed to access network translation.
- B. The pool of IP addresses has been exhausted.
- C. If the number of available IP addresses is exceeded, excess traffic will use the specified address pool.
- D. Multiple internal hosts will use one IP address to access external network resources.
Answer: D
Explanation:
Explanation/Reference: http://evilrouters.net/2009/07/09/configuring-basic-nat-with-overloading/
Overloading (having multiple clients all NAT'd to the same IP address) is probably the most common implementation (especially for those of us who run NAT on a Cisco box at home!).
NEW QUESTION # 69
The command ip route 192.168.100.160 255.255.255.224 192.168.10.2 was issued on a router. No routing protocols or other static routes are configured on the router. Which statement is true about this command?
- A. The interface with IP address 192.168.10.2 is on this router.
- B. The command creates a static route for all IP traffic with the source address 192.168.100.160.
- C. Packets that are destined for host 192.168.100.160 will be sent to 192.168.10.2.
- D. The command sets a gateway of last resort for the router.
Answer: C
Explanation:
160 it's actually network address of /27 so any address within the range of 160 network will be sent to 192.168.10.2
NEW QUESTION # 70
Refer to the exhibit.
SwitchA receives the frame with the addressing shown in the exhibit. According to the command output also shown in the exhibit, how will SwitchA handle this frame?
- A. It will drop the frame.
- B. It will flood the frame out all ports except Fa0/3.
- C. It will forward the frame out port Fa0/6 only.
- D. It will flood the frame out all ports.
- E. It will forward the frame out port Fa0/3 only.
Answer: B
Explanation:
When frame receives the frame, it checks the source address on MAC table if MAC address found in MAC table it tries to forward if not in MAC table adds the Address on MAC table. After checking the source address, it checks the destination address on MAC table, if MAC address found on MAC table it forwards to proper ports otherwise floods on all ports except the source port.
NEW QUESTION # 71
Which command can you use to manually assign a static IPV6 address to a router interface?
- A. ipv6 address 2001:db8:2222:7272::72/64
- B. ipv6 autoconfig 2001:db8:2222:7272::72/64
- C. ipv6 address PREFIX_1::1/64
- D. ipv6 autoconfig
Answer: A
NEW QUESTION # 72
DRAG DROP
Answer:
Explanation:
Explanation:
NEW QUESTION # 73
......
The Facebook 100-101 exam covers a wide range of topics, including audience targeting, campaign optimization, and performance measurement, among others. It is a rigorous test that requires individuals to have a deep understanding of the different digital marketing channels and how they can be leveraged to achieve business objectives. Successful completion of the exam demonstrates that an individual has the knowledge and skills required to develop and execute effective digital marketing campaigns.
Get Perfect Results with Premium 100-101 Dumps Updated 85 Questions: https://pass4sure.actual4dump.com/Facebook/100-101-actualtests-dumps.html