Give Push to your Success with Veritas NetBackup VCS-285 Exam Questions
VCS-285 100% Guarantee Download VCS-285 Exam PDF Q&A
NEW QUESTION # 29
What is the maximum number of storage shelves that can be attached to a NetBackup 5340 appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 30
Which command is used by VxUpdate to upgrade clients?
- A. nbrepo
- B. nbhostmgmt
- C. vmupdate
- D. nbinstallcmd
Answer: D
NEW QUESTION # 31
What are the two types of encryption that NetBackup supports for backup data?
- A. Client-side encryption and media server encryption
- B. Software encryption and hardware encryption
- C. All of the above
- D. Symmetric encryption and asymmetric encryption
Answer: C
NEW QUESTION # 32
Backup jobs end with the following series of messages in the Job Details:
Error bpbrm (pid=41876) db_FLISTsend failed: Unable to connect to the database (2505)
12/05/2013 15:39:45 - job 63389 was restarted as job 63390
Failed to get status code information (2505)
Which process is failing to respond?
- A. bpbrm
- B. bpdbm
- C. nbjm
- D. nbemm
Answer: B
NEW QUESTION # 33
What is the name of the NetBackup web interface that lets you manage and protect cloud assets and configure cloud storage in NetBackup?
- A. NetBackup Cloud Console
- B. NetBackup Cloud Administrator
- C. NetBackup Cloud Portal
- D. NetBackup Cloud Manager
Answer: B
NEW QUESTION # 34
An administrator is performing a backup and receives the following error message:
129 Message: Disk storage unit is full
Which NetBackup command should the administrator use to report the potential free space of AdvancedDisk storage units?
- A. nbdiscover
- B. bpdbdm
- C. nbemmcmd
- D. nbdevquery
Answer: D
NEW QUESTION # 35
A NetBackup appliance is reporting a high disk usage. What steps can be taken to troubleshoot the problem?
- A. Check the appliance's logs for errors.
- B. Contact Veritas Support for assistance.
- C. Delete old backup data.
- D. Check the appliance's backup policies.
Answer: D
NEW QUESTION # 36
Which communication protocol and port does the Appliance Management Server use to communicate with Appliance Management agents?
- A. http (80)
- B. https (8443)
- C. https (443)
- D. http (8080)
Answer: C
NEW QUESTION # 37
What is the name of the command that lets you manually duplicate a backup image to another storage unit in NetBackup?
- A. bprestore
- B. bpcopy
- C. bprelocate
- D. bpduplicate
Answer: D
NEW QUESTION # 38
Which interface can be accessed from the IPMI web interface or Veritas Remote Management (VRM) interface?
- A. NetBackup Appliance Web Console
- B. NetBackup Appliance Shell Menu (CLISH)
- C. NetBackup WebUI
- D. Appliance Management Console
Answer: B
NEW QUESTION # 39
Which of the following resources can be used to analyze and optimize NetBackup performance?
- A. Veritas NetBackup Deduplication Guide: v10.1
- B. Veritas NetBackup Appliance Administrator's Guide: v5.0
- C. All of the above
- D. Veritas NetBackup 10.1 Administrator's Guide, Volume I
Answer: C
NEW QUESTION # 40
An administrator is comparing the NetBackup Accelerator and NetBackup FlashBackup features to determine which feature should be used for backup of a very large file system with millions of files.
Which consideration is irrelevant when determining whether to use NetBackup Accelerator or NetBackup FlashBackup in the situation?
- A. the file system storage capacity
- B. the type of file system being used
- C. the file system change rate
- D. the file system folder depth
Answer: C
NEW QUESTION # 41
What are the two types of reports that NetBackup provides to verify and monitor backup activities?
- A. Activity Monitor and Report Manager
- B. Activity Monitor and OpsCenter Analytics
- C. Backup Monitor and Dashboard Analytics
- D. Job Monitor and Report Manager
Answer: B
NEW QUESTION # 42
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A. bpimmedia
- B. bpclntcmd
- C. bpmedia
- D. bplist
Answer: A
NEW QUESTION # 43
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is greyed out and therefore unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
- A. select a backup destination that supports synthetic backups
- B. create a differential or cumulative incremental backup schedule
- C. enable Collect true image restore information with move detection
- D. create a full backup schedule with Accelerator forced rescan enabled
Answer: C
NEW QUESTION # 44
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
- A. set the "Allow multiple data streams" policy attribute
- B. enable the "Limit Jobs per policy" attribute
- C. enable multiplexing for the storage unit and set the value
- D. set the "Maximum jobs per client" host property
Answer: B
NEW QUESTION # 45
Backups to a storage device fail with the following error message:
Disk storage server is down (2106)
The storage server is an OpenStorage (OST) host, and the master server and media server are both acting as media servers under Credentials > Storage Servers in the NetBackup Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug-in version installed on the servers?
- A. bpstsinfo
- B. nbemmcmd
- C. bpgetconfig
- D. nbdevquery
Answer: A
NEW QUESTION # 46
What is the certificate deployment and management behavior when the security level is set to High?
- A. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every hour.
- B. Certificates are deployed automatically for all hosts and the Certificate Revocation List (CRL) is refreshed every hour.
- C. Certificates are deployed with a token for all hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- D. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
Answer: D
NEW QUESTION # 47
Refer to the Exhibit.
An administrator is trying to access client properties on the NetBackup Administration Console and receives the following message:
When checking the services on the master server, the administrator sees that the PBX service is down.
Which two commands can the administrator use to increase the PBX log level to determine the reason for the message above? (Choose two.)
- A. vxlogmgr
- B. pbxcfg
- C. vxlogcfg
- D. vxpbx_exchanged
- E. pbx_exchange
Answer: A,C
NEW QUESTION # 48
What is the name of the command that lets you verify the integrity of a backup image in NetBackup?
- A. bpverify
- B. bpvalidate
- C. bpcheck
- D. bpimage
Answer: A
NEW QUESTION # 49
Which two tasks can be performed from the Appliance Web Console? (Select two.)
- A. create a backup policy
- B. resize the MSDP partition
- C. create a storage lifecycle policy
- D. run a manual backup
- E. add or delete additional servers
Answer: B,E
NEW QUESTION # 50
Which of the following is true about the NetBackup documentation landing page?
- A. It provides troubleshooting advice for NetBackup users.
- B. It only offers documentation for the latest version of NetBackup.
- C. It includes whitepapers, guides, and videos on best practices for NetBackup.
- D. It provides a list of available training courses on NetBackup.
Answer: C
Explanation:
Explanation
(Explanation: The NetBackup documentation landing page includes a variety of resources, including whitepapers, guides, and videos, on best practices for NetBackup, enabling users to optimize their use of the product.)
NEW QUESTION # 51
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
- A. Prioritized
- B. Failover
- C. Round Robin
- D. Media Server Load Balancing
Answer: C
NEW QUESTION # 52
......
Get VCS-285 Actual Free Exam Q&As to Prepare Certification: https://pass4sure.actual4dump.com/Veritas/VCS-285-actualtests-dumps.html